Super Square

[harry strasil]

I made a Super Square today, its 59 inches to a side. I scribed a center line on 3 straight scrap narrow boards, 2.5 to 3 inches wide, then marked a starting point near one end of each and using dividers stepped off one with 3 divisions, one with 4 divisions and one with 5 divisions and then drilled 1/4 inch holes for carriage bolts and used fender washers and a nut to tighten it together. I got an upcoming use marking 30+ inch wide roofing tin for my new roof.

[Justin Cavender]

No picture didn't happen

[harry strasil]

I guess it didn't then, U taking lessons from Tyler? It must be a mirage, I tried to load into my photobucket album 4 times and it never showed up.

[Justin Cavender]

Jr. That is a good idea I am going to copy that when it comes time to roof my new workshop in the near future.