Stephen Massman
10-05-2009, 9:15 AM
I have an older 13" drill press model number 113213842. I have trouble getting any torque on the unit. I need a new belt and will probably go with a link belt.
The main problem I have is the spindle pulley keeps coming off. The nut ring #46 in manual keeps coming loose. I tighten it as best I can but it comes off eventually. Any recommendations on how to keep this ring in place. I looked for a replacement nut ring but Sears online parts has the item as discontinued.
Also how much grease should be present on where the pulley meets the insert #44.
http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0805251.pdf
thanks for the help.
The main problem I have is the spindle pulley keeps coming off. The nut ring #46 in manual keeps coming loose. I tighten it as best I can but it comes off eventually. Any recommendations on how to keep this ring in place. I looked for a replacement nut ring but Sears online parts has the item as discontinued.
Also how much grease should be present on where the pulley meets the insert #44.
http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0805251.pdf
thanks for the help.