Looking for 4 Poster bed post

[Craig D Peltier]

Does anybody here have a place online to find tall post for beds that are turned. Approximately 5-7 feet tall.

I tried Osborne and Tablelegs.com

Thanks

[harry strasil]

You might try a yard and look at the porch support posts as a starter.

[Bill Arnold]

See if Adams (https://www.adamswoodproducts.com/configure.asp?cat=33) has what you need.

[Paul Atkins]

There must be a turner in your area - then you can get exactly what you want.

[Craig D Peltier]

I would think there are several sites that host these types of post.

I had thought of a porch post and im sure theres a quite a few available. Thanks

[johnny means]

Unfortunately, your only solution is to buy a lathe and do it your self.:D

[Matt Evans]

And, when you buy the lathe to do it yourself, you need to get one with 84" between centers to get your 7' post. . .

[lowell holmes]

Actually, you can turn the posts in two pieces with a round slip joint to join them. I've seen articles on it.:)