Performax Drum Sander Question

[John Myer]

I recently purchased a used Performax 10-20 + Drum Sander. Although it appears to have been used very little, it looks like the conveyor belt is going to need a replacement fairly soon. It appears that the Jet 10-20 drum sander uses a new type "No Give" - Tracker conveyor belt. From the pictures, they appear to be white rather than the traditional black grit belt. I assume the Jet belt will likely fit the Performax model.

Does anyone have an experience with the belt that I am referring to? I can not find the belt on the Jet website because I do not have the right part number. Any suggestions or experiences would be appreciated.

[Jim Eller]

John,
[/URL]
Call these folks, [URL="http://www.industrialabrasives.com/"]http://www.industrialabrasives.com/ (http://www.industrialabrasives.com/) . They will make what you need. ........and cheap too.

I ordered a couple of spares for my 22-44.

The lady that owns the place is really friendly and helpful.

Jim

[Robert Chapman]

I think that what you are looking for is a belt made by Ammerall Beltech and sold by Hamilton Tool Supply www.toolsupermarket.com