John Myer
10-01-2009, 12:00 AM
I recently purchased a used Performax 10-20 + Drum Sander. Although it appears to have been used very little, it looks like the conveyor belt is going to need a replacement fairly soon. It appears that the Jet 10-20 drum sander uses a new type "No Give" - Tracker conveyor belt. From the pictures, they appear to be white rather than the traditional black grit belt. I assume the Jet belt will likely fit the Performax model.
Does anyone have an experience with the belt that I am referring to? I can not find the belt on the Jet website because I do not have the right part number. Any suggestions or experiences would be appreciated.
Does anyone have an experience with the belt that I am referring to? I can not find the belt on the Jet website because I do not have the right part number. Any suggestions or experiences would be appreciated.