Larry Edgerton
09-30-2009, 9:57 AM
I am in the middle of searching for a 2 1/4" bed mold cutter at the discount Tiawan{ahhh!} cutter dealers to match a molding on a restoration project, and am not having any luck. I have very little to run and my cutter bill is already over $2K on this project so I am looking at cheap. It has to be carbide as the material is Azek.
So..... If you know of one off hand and can save me from the Google blues, please post. I'll check back.
Larry
So..... If you know of one off hand and can save me from the Google blues, please post. I'll check back.
Larry