Doug Shepard
09-12-2009, 9:38 AM
I'm installing some Accuride #7434 slides and I'm a bit confused on one of the install instructions.
http://accuride.com/Resources/PDF/7432-r9-1007.pdf
I have the cabinet member portion installed with the first 2 screws but the rail portion that goes on the drawer has me a bit stumped. On page 2 of the pdf instructions it has:
Mark horizontal line on drawer side 1-7/32" [30.7] above cabinet member holes center line.
I cant wrap my brain around this one. I tried taking the cab member CL distance (from the bottom of the cab) on the lowest rail, adding 1-7/32" to that, then marking that distance from the bottom of the drawer. But when I slide the drawer in between the slides and check where the rail holes line up with that mark things dont look quite right.
I'm also wanting to have the drawer bottom 1/8" above the carcass bottom, so laying some 1/8" spacers on the floor and sliding the drawer in would throw that mark off another 1/8" anyway.
But I'm confused on how the instructions reference to index something off the cabinet CL equates to being able to index a mark off the drawer sides.
Maybe I just need another cup of coffee this morning??:confused:
http://accuride.com/Resources/PDF/7432-r9-1007.pdf
I have the cabinet member portion installed with the first 2 screws but the rail portion that goes on the drawer has me a bit stumped. On page 2 of the pdf instructions it has:
Mark horizontal line on drawer side 1-7/32" [30.7] above cabinet member holes center line.
I cant wrap my brain around this one. I tried taking the cab member CL distance (from the bottom of the cab) on the lowest rail, adding 1-7/32" to that, then marking that distance from the bottom of the drawer. But when I slide the drawer in between the slides and check where the rail holes line up with that mark things dont look quite right.
I'm also wanting to have the drawer bottom 1/8" above the carcass bottom, so laying some 1/8" spacers on the floor and sliding the drawer in would throw that mark off another 1/8" anyway.
But I'm confused on how the instructions reference to index something off the cabinet CL equates to being able to index a mark off the drawer sides.
Maybe I just need another cup of coffee this morning??:confused: