Dick Parr
09-14-2004, 3:55 PM
While I was out in the shop modifying the tool rest support for the old lathe, I decided to also make a stand for the Jet Mini. :D It has been sitting on a portable table since I got it with twice as big a footprint. This was ok, but then I made a cabinet with a couple of drawers for it which made it too high up to be comfortable turning. :eek:
It is just a few 2x's put together and is level with no bounce or vibration and is the right height so that I can sit and turn when I need to. It's was only about 45 min. work and looks like it, but it works. :o
Thanks for looking.
It is just a few 2x's put together and is level with no bounce or vibration and is the right height so that I can sit and turn when I need to. It's was only about 45 min. work and looks like it, but it works. :o
Thanks for looking.