Joe Zerafa
09-10-2009, 9:41 PM
Hi all, i find cutting mitres on my saw (Minimax CU300 smart) a real pain, i was thinking about making a mitre sled for my machine. Now i have seen a stack of mitre sleds for traditional tablesaws but never any for saws equiped with a slider.
Can anyone point me towards a plan/pic or suitable design?
I have been playing around with sketchup, but i am interested in finding out if anyone has any good solutions. The biggest issue i can see with my design is that the slider fence has to be removed , no big hassle but it will also mean i will lose my 90 degree reference to the saw blade making positioning the jig a little trickier.
Thanks
Joe
Can anyone point me towards a plan/pic or suitable design?
I have been playing around with sketchup, but i am interested in finding out if anyone has any good solutions. The biggest issue i can see with my design is that the slider fence has to be removed , no big hassle but it will also mean i will lose my 90 degree reference to the saw blade making positioning the jig a little trickier.
Thanks
Joe