PDA

View Full Version : Looking for Rose graphic



Scott Shepherd
09-10-2009, 3:07 PM
Hello all, I'm looking for a single rose, blooming, on the stem in vector format. I have some, and I've searched the forums and seen various ones, but none that fit the bill.

Engraving will be done on glass and the image will be about 1 1/4" tall, complete. So I can't have really detailed stuff. The few I have, and have seen that are single roses on the stem, all look like the poor rose is sick.

Anyone got any good looking roses, single bloom, single stem that will engrave on glass that small?

Thanks!

Dave Russell Smith
09-10-2009, 3:35 PM
This is all I've got :(

Steve Clarkson
09-10-2009, 3:45 PM
Not much, but maybe you can work with them.

Scott Shepherd
09-10-2009, 3:52 PM
Thanks Dave, a little too cartoony for this requirement.

Steve, thanks, I'd already downloaded that from a previous post of yours. The one's on the right don't look bad, but the flowers on the stems look wilting. It's for a positive occasion, so I'd like it to look "perky" and alive :)

George M. Perzel
09-10-2009, 4:09 PM
Hi Scott;
Here's a bunch-have more if they don't work
Best regards;
George
LaserArts

Frank Corker
09-10-2009, 5:41 PM
'Perky' rose.... mmmm mind boggles. Here are a few more for you to look at.

Scott Shepherd
09-11-2009, 1:01 PM
Thanks guys, I think I can work with one of those. Frank, I specifically think I can work with the "Perky Rose" in that file ;)

Scott Erwin
09-11-2009, 8:09 PM
Frank is the best....He even had the Perky Rose that seem to have eluded a lot of us.

Randy Walker
09-11-2009, 8:37 PM
Here is one more. I picked it up several months ago from another post here at SMC. It engraves well although I havent tried it in glass.

Good luck
Randy Walkerhttp://www.sawmillcreek.org/images/icons/icon10.gif

Scott Shepherd
09-11-2009, 8:47 PM
Randy, can you save that in X3 or V12 please? Can't open it and I'd like to see it.