Dave Gallaher
08-29-2009, 4:58 PM
Need a three blade cutterhead
Tony Joyce
08-31-2009, 10:36 PM
I have an original 180 head from a late 60's machine. No bearings(I have the used set that came out of it that were running perfect with no noise, but are not on the head) or pulley, but I'll include 3 sets of knives(2-sharp, 1-used), wrench, & height setting gauge. I don't know the value for this head, I replaced mine with a Terminus head($1,800)
Tony
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.