Howard Boehm
08-25-2009, 8:21 PM
I was building a dust collection box to enclosed my router which is attached to my table saw top. I wanted to bevel the bottom so the dust would flow toward the center and be more efficient. My first attempt at the angles was a total failure. I went searching for a chart or something that would tell me the miter and bevel angels. well I found a bevel and miter calculator that is so good I imputed the data and it gave me the rough cut dimensions for the four sides and the bevel and miter angels. I cut them just as it said and it came out perfect the first time out. I have no affiliation with this program but it solves a problem a lot of us fight all the time. The two photos show the result. The program is called the perfect cut. http://www.perfectcuts.com/index.asp