Terry Achey
08-09-2009, 11:50 PM
I recently tried a few "firsts" such as inlay (inlace product); and a cherry hollow form low profile bowl and a variety of bottle stoppers along with a couple small beer taps.
The inlace product was very easy to use ands even easier to work with the cutting tools. Not sure I like my choice of lids and materials, but was experimenting with all sorts of stuff. Oddly enough the finial fit (sorta) both bowls. I still have lots to learn regrading bottle stopper size and design. My first stoppers were simply to large.
Not the greatest work but fun to work with. As always, suggestions welcome. I'll add a second post w/pics.
Terry
The inlace product was very easy to use ands even easier to work with the cutting tools. Not sure I like my choice of lids and materials, but was experimenting with all sorts of stuff. Oddly enough the finial fit (sorta) both bowls. I still have lots to learn regrading bottle stopper size and design. My first stoppers were simply to large.
Not the greatest work but fun to work with. As always, suggestions welcome. I'll add a second post w/pics.
Terry