Gary Hitchcock
08-07-2009, 2:59 PM
:confused: I got a good deal at a yard sale, got few hundred hinges in a bag,
got them home and found that they did not have screw holes, but had a small kerf that you press into the wood.
I'v beet'em with hammers, pressed'em but can't get'em to stick,
Their thin brass and bend very easy, I can get one side to stick but the other side needs to be embedded from the different direction.
I'm building small boxes of 1/2 pine or popular.
How do you get them to stick ?
Their like these.
http://www.rockler.com/product.cfm?page=16927
got them home and found that they did not have screw holes, but had a small kerf that you press into the wood.
I'v beet'em with hammers, pressed'em but can't get'em to stick,
Their thin brass and bend very easy, I can get one side to stick but the other side needs to be embedded from the different direction.
I'm building small boxes of 1/2 pine or popular.
How do you get them to stick ?
Their like these.
http://www.rockler.com/product.cfm?page=16927