bandsaw statement

[Mike Minto]

my bandsaw scares the hell out of me. mike

[David Christopher]

Mike, maybe you should hide it in the closet

[Brian Kincaid]

My tablesaw scared me too much so I got rid of it. Brian

[Chris Rae]

Just pet it and feed it some sticks once in awhile.:)
Seriously, my tablesaw is what scares me. All the safety guards are in place and will remain that way.

[Mike Stephens]

I'm scared that my new refrigerator will not hold enough beer. :p

[Jason Clark2]

Mine doesn't scare me but I am very careful and respectful of it. I wasn't careful with it once and I paid the price. It took 2 surgeries and 6 months physical therapy to get back 90% of the movement in my left pinky.

Jason

[Jim Underwood]

sYeah, mine has scared me a time or two. Especially when the guides are in the top position and you're making the deepest cut possible. That's a lot of blade hanging out there.

I'm more wary of it than ever.

[Scott Hackler]

Dont ever watch a butcher cut t-bones on his band saw or you'll probally never use yours again... after you see how easy it goes through meat and bone.

[Rich Stewart]

That is a fact, JACK!

[Bernie Weishapl]

When I was a boy my granddad always told me over and over when we were in his woodworking shop if you are scared of your tools you have no business in the shop. Respect them yes but scared no.

[Kirk Miller]

If she ever figures out that I have spent enough on wood to buy her 2 wedding rings I am a dead man............lol

[Walt Caza]

Hi Mike,
Thanks for your candor... such a brave confession.
Many might be too chicken, to admit fear of a machine?
It takes strength, to admit what some may perceive as weakness.

Brace yourself for another horror story. (*messy warning*)
When I was in grade 7, they had a program in which they bussed us
to the highschool for a couple hours of wood shop each week.
Standing next to a buddy, both 12, cutting a bowl blank round at a 14"
bandsaw, guard to the moon...
he sliced off his ring and pinkie fingers right in my face.

I learned about shock that day, and saw how he wasn't 'him' in the moments that followed.
Yep, the kid got a sew job to re-attach, but little motion and no feeling.
And I got a graphic lesson, the kind you get to keep.

So, go ahead Mike... respect it, ...fear it or sell it...
the bandsaw is capable of hurting us.
My 5hp bandsaw has a 16" resaw, certainly not for the timid!

No need for safety lectures, thanks, I got the message already.
be well,
Walt

ps In my shop, rule #1 is... bleeding sucks!

[Greg Just]

I agree with Bernie - Respect your tools! I respect my tablesaw alot more than my cheapo bandsaw.

[Malcolm Tibbetts]

I don't know when it might be available, but the people that brought us the Saw Stop table saw are working on a band saw with the same "STOP" capabilities.

[Gary Conklin]

When I was keeping snakes I ran into a saying from a venomous species collector, it has kinda stuck with me:

Familiarity breeds contempt.

Just proceed with caution and respect each and every time and all will be well. I feel this way with my tablesaw. Treat it like a poisonous snake!

[Jack Mincey]

I've taught high school shop for 26 years and I've always told my students that being afraid of a tool is almost as dangerous as being over confident with it. I've never made a student use a tool that they where scared of, because as Bernie said you have no business using one that scares you. The bandsaw does require a lot of respect when you are roughing out a bowl blank.
Jack

[Jeff Nicol]

To fear something is to not understand it. Fear can be overcome with knowledge and practice. But like Norm Abrams says" READ AND UNDERSTAND ALL INSTRUCTIONS AND SAFTEY MEASURES" before operating a power tool. Use the tool correctly and it will treat you right! Being confident on what you are doing is not like being arrogant and saying you do and don't.

So show no fear just patience and respect!

Jeff

[Richard Madison]

Mike, Can you identify specifically what scares you? I am mostly scared of ruining an expensive blade. And/but I pay close attention to location and direction of travel of all my body parts in relation to the blade location. Usually even take a moment before turning on the saw to think about how to make the cut safely, where fingers are going to be and if some sort of push block is needed. Stuff like that.

[Keith Spaniel]

Mike, i fear my bandsaw too. Im glad i have that fear of it. It makes me be more careful and thoughtful of what i am doing. I always try to use some clamp or something to hold my work. most of my accident's are when i hurry,
Done to much factory piece work . Have you seen the guy at the wood show cut out rein deer from 2x4s ? He goes fast and talks at the same time.
I hope he never ,spaces out while hes on the saw. A Healthy fear is good.

[Reed Gray]

Kind of like turning, keep your tools sharp, don't force things, and keep out of the line of fire, which on the saw is don't push straight towards the blade. Respect them, but never turn your back on them.
robo hippy

[Kim Ford]

Mike;

I must agree with Bernie as well. Respect is one thing, fear is another. Bandsaw's are designed to cut whatever you present to the blade. Free hand cutting of a half round wet log at the band saw is not something for the novice.

Get some training, start off with smaller, dry dimensional lumber, know the limitations of your machine, make sure you have the correct blade and it is sharp; but then. . . .

If you still are uncomfortable; GET RID OF IT. Hands and fingers are too important.

I respect all of my tools, but in my opinion the elephant in the room has always been the bandsaw when you use it to round up log blanks.

[Gary Herrmann]

Always listen to the little voice in your head. If you're uncomfortable with a specific action or cut - don't do it.

Don't rush through anything. Take your time and think it through.

Don't use a tool if you're tired. I've been working a lot of OT lately and as a result I've gotten no shop time. I just don't feel alert enough to work on anything safely when I get home.

It is likely you will get more comfortable with it over time, but as others have said, if you don't - sell it. There's no reason to cause yourself undue stress.

I think the tool that makes me the most nervous is my chain saw.

[Thom Sturgill]

I'd have to say that the only tool that scares me would be the router, that's why I built a router table to help control it. Don't get me wring, I respect the tools, and have the scars to warrant that respect. Most of the scars are from using a dull knife or gouge, or working under conditions that were not safe and being too stubborn (or stupid) to quit until I get that last cut done...

I cut the tip of my left index finger (I'm left handed) and the way the tissue twisted, it will always feel funny. You know, sometimes I'm glad its that way (and not worse of course) because its a constant reminder to stop BEFORE that last cut if I need to.

[Ryan Baker]

Usually, being afraid of a tool is the result of 1) not understanding how to use it properly, and/or 2) having some very scary close calls which result from using it incorrectly. Every tool demands respect and will jump out and bite back as soon as complacency sets in. But the band saw is one of the safer tools in the shop when used as designed. If some operation in particular is scary, there is probably a better, safer way to perform that operation. Thouroughly understand your tools before you use them and there shouldn't be any reason for fear -- just a healthy respect and heavy dose of caution. And if the voice in your head is screaming that something is dangerous -- listen to the voice.

[Darius Ferlas]

I can't say I'm scared of any tool but I feel what others suggested - respect for every single one of them. Even the lowly paper towel, which can spontaneously ignite having been used with polyurethane.

Between the two, TS and BS, while taking all the precautions with either, TS blades not only look hungrier to me, but they also have that smirk in them telling me they can throw stuff back at me at high speed and without a warning.

[Tony Greenway]

Sometimes being a little scared helps you to be more cautious. After using 12" and 14" band saws for the last 25+ years in my cabinet shop, I recently set up a 31" band saw which stands over 9' tall to cut bowl blanks and resaw some lumber. I admit I was scared when I fired that monster up the first time with the guide raised about 18" high, but then the total respect I have for my machinery kept me focused on safety.
The best advise I can give is when you are operating your shop equipment, if something does'nt fell right to you, don't do it........Tony

[curtis rosche]

if you are scared of your saw, i can take it off your hands

[Roger Alexander]

I'm not sure about any one else. I learned early in life on many things. Just treat it nice like you would your Mother-in-law. Heck you never know when it will get mad and strike you. That is just life in the motor pool.