Tim Put
07-31-2009, 11:46 AM
Hi -
You should see the small crosscut (16TPI) in the fall (same size as the current dovetail), followed by a fine(r) dovetail saw (20TPI). Last one will be a larger carcass saw... possibly Christmas, but still not sure...
Cheers -
Rob
http://www.ukworkshop.co.uk/forums/viewtopic.php?p=371227&highlight=#371227
Some of you may find this interesting. :cool:
It's from May, so please excuse me if it's already been posted.
You should see the small crosscut (16TPI) in the fall (same size as the current dovetail), followed by a fine(r) dovetail saw (20TPI). Last one will be a larger carcass saw... possibly Christmas, but still not sure...
Cheers -
Rob
http://www.ukworkshop.co.uk/forums/viewtopic.php?p=371227&highlight=#371227
Some of you may find this interesting. :cool:
It's from May, so please excuse me if it's already been posted.