Mounting Hitachi C10FSH on a Bosch T4B?

[Deck Reagan]

Hi everyone. I just bought the Hitachi C10FSH and the Bosch T4B stand. Has anyone used these two products together? It seems like I will need to mount the saw to a piece of ply and then to the T4B mounts is this correct?

Thanks,

deck

[Rick Huelsbeck]

I put a 2x2 on either side of the saw and then ran screws into the 2x2 from under the T4B (Gravity Rise Stand)

[Deck Reagan]

Rick,
You stand looks to have different mounts than mine, but I like your idea.

deck

[Chris Tsutsui]

I attached my C10FSH to a new model Rigid M-SUV.

Square sheet of BB Plywood attached to the miter saw, and then the plywood bolted to the MSUV.

Works great

[Chris Tsutsui]

BTW, I used the largest bolts possible and washer + lock washer.

I wouldn't trust using screws into the plywood to hold the saw... especially since i store it so the saw is vertical.

You may also consider lock nuts.