Miter slot track?

[Randall Clark]

Is the metal track that is used for the miter slot on a router table specifically made for this application and must be bought from a router supply supplier or can it be purchased at a HD, Lowes, metal shop?:confused:

[Billy Chambless]

Most of the usual woodworking supply sources have it; I've never seen it anywhere else.

http://www.leevalley.com/hardware/page.aspx?c=2&cat=3,43576,61994,45161&p=45161

[Cary Falk]

Most of the usual woodworking supply sources have it; I've never seen it anywhere else.

http://www.leevalley.com/hardware/page.aspx?c=2&cat=3,43576,61994,45161&p=45161


I bought a piece of that at either HD or Lowe's. My guess is Lowe's. It is in the hardware section with the rest of the angle iron and such. They say it is used for holding plywood or something weird. I think it come in 1/2, 5/8 3/4 and maybe 1/4 and 3/8. I have a piece in my router table. I bought it like 5 years ago so I don't know if they still carry it.

[Bill Huber]

There are a lot of places that sell it.

Preachtree has a good selection.

http://www.ptreeusa.com/ttrackproducts.htm#1033

Eagle has it.

http://www.eagleamerica.com/product/v415-9322/router_table_systems

[Craig Coney]

Incra makes it as well... Try WC or Rockler

[Cliff Rohrabacher]

You can use any thing at all that works.

[Randall Clark]

Thanks Cliff. I am just trying to find out the least expensive thing that does work.