Jerome Hanby
07-17-2009, 2:27 PM
Just saw one of these at WoodCraft. It's currently on sale for $699. It looks like a ton of bandsaw for that price. Twelve inches of re-saw no riser needed. Rack and Pinion control on the guide bar (adjusts the upper guides, may have the term wrong:o). Marble table with a straight cut (not a t) miter slot. Has a cast iron upper wheel and one very funny looking marble lower wheel.
Guy at Woodcraft kept referring to the motor as 1/2 HP, WWW says 1 & 1/2 HP (which makes much more sense).
For the life of me, I can't recall anything about the fence. It may not have been mounted on the floor display.
Frame was cast iron.
If I thought my wife would have let me live, I'd have one on the truck right now.
Guy at Woodcraft kept referring to the motor as 1/2 HP, WWW says 1 & 1/2 HP (which makes much more sense).
For the life of me, I can't recall anything about the fence. It may not have been mounted on the floor display.
Frame was cast iron.
If I thought my wife would have let me live, I'd have one on the truck right now.