Will Incra T Track work with 5/16 T Bolts ?

[Lewis Cobb]

Hi -

Quick question - I am thinking of making a jig with Incra T track and am wondering if this will accept 5/16 t bolts or just 1/4". Looked on the incra site but can only seem to find that you can slide a 1/4 nut or bolt head in the track, nothing about the shank size of the bolt and width of the opening in the track. That does not mean the info is not there mind you, - just that I can't find it :D

Thanks for the help !

Lewis

[glenn bradley]

My Incra stuff on my DP table and small sled are for 1/4". I generally use Rockler's track which is for 5/16" or 1/4" t-bolts or 1/4" hex bolts (http://www.rockler.com/product.cfm?page=21967&filter=t%20track) on everything else.

[Lewis Cobb]

My Incra stuff on my DP table and small sled are for 1/4". I generally use Rockler's track which is for 5/16" or 1/4" t-bolts or 1/4" hex bolts (http://www.rockler.com/product.cfm?page=21967&filter=t%20track) on everything else.


Hi Glenn -
ok - that pretty much sets the path for me - thanks very much !
Lewis