View Full Version : Help needed locating manual for scroll saw
Gordon Davis
07-06-2009, 10:08 PM
Well I am deep into another vintage resto 1940's Craftsman 24' scroll saw model # 103 0404.Any one have a manual or leeds to one, thanks for your help.:)
Jeff Bratt
07-06-2009, 10:25 PM
Here is (what is purported to be) a copy of the original manual. Note the front page of the manual says it covers both models 103.0403 and 103.0404. Unfortunately, this manual is essentially a parts list...
Peter O'Day
07-06-2009, 10:50 PM
Last week I was looking for a manual for an old Craftsman bandsaw. Couldn't find it directly from Sears or google. Stumbled across OwnerIQ. Posted my need And within a day a guy who's been stuck at home lately sent me a link to the manual at managemyhome.
scott clary
07-07-2009, 7:42 AM
P.M. sent
Scott
Gordon Davis
07-07-2009, 11:33 AM
Thanks for all your help,I will post some pics as I restore scroll saw.:)
Fred Hargis
07-07-2009, 12:33 PM
Thanks for all your help,I will post some pics as I restore scroll saw.:)
If you ever see a presser foot or the motor mounting bracketry for that model for sale (and you don't need it) I'm still looking that stuff, then mine will be a functioning part of the shop.
Gordon Davis
07-08-2009, 12:57 PM
Here are a couple pics before I start the resto :)
Fred Hargis
07-08-2009, 3:56 PM
Is the crank assembly there to increase tension on the blade? I can't tell from the photo, but overall that saw looks to be in pretty good shape.
Gordon Davis
07-08-2009, 4:16 PM
yes, all there
Mike Wellner
07-08-2009, 5:07 PM
I have one with the original blue paint and badge, but needs a restoration. $25.00
Fred Hargis
07-09-2009, 12:49 PM
PM sent....
Rick Pettit
03-30-2011, 9:33 AM
I know this an old thread but I recently came across one of these with the original blue paint and badge. Does anyone have a manual. Better yet the only question I have is how the motor adjustment works. The back two bolts for the motor were not connected to the saw base. I think that they should be. If they were though changing the speed would be much more difficult. Anybody have one?
Myk Rian
03-30-2011, 11:07 AM
vintagemachinery.org
scott clary
03-31-2011, 6:09 AM
P.M. me if you need a pdf
Scott
Don Busiek
12-10-2012, 9:23 AM
I have just acquired a 103.0404 probably all original. It has a 1/3 hp 1750 rpm Dunlop motor.
The motor bolts to a base plate that pivots on the edge nearest the saw table and allows the wheight of the motor to creat tension on the drive belt. I am looking for the 8 page manual.I have downloaded the 4 pg parts list but it is of no real use as the parts are not arranged in an exploded view but just listed with their part numbers
scott clary
12-10-2012, 10:33 AM
I'll see if I can find the PDF when I get off work
Scott
Ken Fitzgerald
12-10-2012, 11:09 AM
I will remind everyone......Links to other forums are not allowed as per the Terms Of Service.....
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.