Joseph Tovar
07-03-2009, 1:44 PM
Hi All,
Does anyone know how to stop the ULS VL-200 from resetting/homing everytime it powers on. This is only when my PC gets shut off. If the PC is on and the laser is powered off, then on, it stays in it's current Z location.
If the PC gets turned off for the night and then back on in the morning and then I power on the laser, the Z axis resets and moves the table to the bottom.
It's not a big deal, but annoying since I usually want to continue what I was doing from the night before without having to re-zoom.
Thanks!
Does anyone know how to stop the ULS VL-200 from resetting/homing everytime it powers on. This is only when my PC gets shut off. If the PC is on and the laser is powered off, then on, it stays in it's current Z location.
If the PC gets turned off for the night and then back on in the morning and then I power on the laser, the Z axis resets and moves the table to the bottom.
It's not a big deal, but annoying since I usually want to continue what I was doing from the night before without having to re-zoom.
Thanks!