Incra bit sets....

[Chris Harry]

Any recommendations on a bit set for an Incra LS setup?

I see different brands and some of them have different bit counts (6 pc, 8 pc, 11 pc, etc), so Im confused as to what a good kit would be to make at least MOST of the joints in the LS template library.

Any suggestions would be appreciated.

Thanks.

-Chris

[Frank Trinkle]

I bought the Whiteside sets and have been EXTREMELY pleased with them....

They are available on Amazon as well as elsewhere...

http://www.amazon.com/WHITESIDE-ROUTER-D9-376-D14-55-D7-625/dp/B000CS7DB4

http://www.amazon.com/WHITESIDE-D101-PIECE-INCRA-ROUTER/dp/B0012JG9XK

[Jim O'Dell]

I bought the Infinity set...haven't used them yet, but did slice my thumb open moving one in the router bit drawer!!! Cut right through the rubberized protective coating and right into the thumb. Incra gives a list of the different bits, angles, ans sizes. I think the Infinity kit is 6, but I filled it in with separate bits to get the 8 Incra shows in their paperwork. Jim.