Ted Baca
06-21-2009, 2:41 PM
I have a Bosch 5412L 12" double compound slider. Somehow my fence has become bent. I am assuming it is from a kickback I had a few weeks ago. Tried to straighten but casting split. So I am wondering rather than reinstall the OEM fence replacement, if I could find a after market fence that might be better. Beismeyer has a fence assy that goes all the way across Left to Right. But I already have this
set on a Rousseau miter stand with swing up wing extensions and am forced to leave the right wing down due to shop space most of the time.
So what I am really looking for is a fence that can directly bolt to the Bosch base about 30"-32" in length that would have both an opening to accomodate miter cuts in all directions and have a stop system for smaller pieces. Any ideas?
set on a Rousseau miter stand with swing up wing extensions and am forced to leave the right wing down due to shop space most of the time.
So what I am really looking for is a fence that can directly bolt to the Bosch base about 30"-32" in length that would have both an opening to accomodate miter cuts in all directions and have a stop system for smaller pieces. Any ideas?