Question on woodworking plans?

[dennis thompson]

I bought a plan from furnitureplans.com. Previous plans I've purchased (from other suppliers) all show three dimensions in the cut list,
ex. Medium drawer fronts-3/4" x 4 3/8" x 15 1/2" .
However these plans only show 2 dimensions ex. Center drawer divider- 1 3/8" x 13 1/8".
Their website has no phone # so I emailed them a couple of days ago but no response yet. Am I missing something here or shouldn't there be three dimensions to all components?
Thanks
Dennis

[Dell Littlefield]

I'm not familiar with those particular plans but usually there are thickness dimensions shown on the cut list. Maybe that will tell you what you need.

[glenn bradley]

I have seen material lists that state the material 3/4" ply, 4/4 cherry, etc. Then the material is grouped by type and parts are stated: 27-7/8" x 3-5/8" (assuming you are in the 3/4" ply section).