Drill Press Drum Sander

[Scott C. Williams]

Does anyone have a source for a drill press drum sander that contains a bottom bearing for template sanding. This would be similar to a router bit with bearing.
Thanks

[glenn bradley]

http://www.leevalley.com/wood/page.aspx?c=2&p=59448&cat=1,42500

http://www.woodcraft.com/family.aspx?familyid=257

[Kyle Iwamoto]

I have a Robo sander. It works, BUT it is VERY slow. I used it to sand 1/8" tops flush to avoid blowouts. If you were to try to pattern sand hardwoods as pictured, it probably will work, but it will be a while. If you're touching up after a router, that may be a different story.