View Full Version : Drill Press Drum Sander
Scott C. Williams
06-16-2009, 3:35 PM
Does anyone have a source for a drill press drum sander that contains a bottom bearing for template sanding. This would be similar to a router bit with bearing.
Thanks
glenn bradley
06-16-2009, 3:38 PM
http://www.leevalley.com/wood/page.aspx?c=2&p=59448&cat=1,42500
http://www.woodcraft.com/family.aspx?familyid=257
Kyle Iwamoto
06-16-2009, 5:03 PM
I have a Robo sander. It works, BUT it is VERY slow. I used it to sand 1/8" tops flush to avoid blowouts. If you were to try to pattern sand hardwoods as pictured, it probably will work, but it will be a while. If you're touching up after a router, that may be a different story.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.