View Full Version : Laser Frost - how too engrave???

Ian Wilson (AUST)
06-15-2009, 5:29 AM
Hi Creekers,

Do you guys have Laser Frost Gold and Silver.
Its to late to call my supplier and I want to do a job but can not find info on settings ( Epilog 35 Watt). Also how do you cut this material.

Do you laser from underneath?

Also how do we cut Alumamark??

Thanks in advance.

Ian Wilson

PS Collect my cheque for first paid job tomorrow!!! YAY!!!

Gary and Jessica Houghton
06-17-2009, 6:07 PM
You cut laserfrost with a sheer. Same with Alumamark.

As far as settings go, I used the same settings as I do for brass, 100s/55p. You may need a second run to clean up any edges. I do this at 10-20% less power.

Hope this helps.

Ian Wilson (AUST)
06-19-2009, 5:08 AM
Thanks, I worked it out in the end with good results.

Man there is a lot to learn but loving every minute if it!!

Cheers Ian

Mike Christen
06-19-2009, 7:05 AM
I got some laser frost and not real impressed, not much contrast so its hard to see at some angles