Robert Rosensteel
06-11-2009, 12:20 PM
Xenetech sent Mike to repair my 24x36 Laser that would not cut circles.He started some test runs and than checked and adjusted rails,bridge,belts y-motor,and replaced the o-ring and mounting bolts.He than replaced the bushings and than shimmed the Y motor.Mike did a really good job and took his time to to answer my questions even when I would get in his way. We finished for the day and he set the machine to run that night to break in the new parts. The next morning we started at 8:00 am
and only stopped for lunch.Mike made some more adjustments,to my table and beam, and we cut some circles in wood and and plastic.They came out great.Just some words for Xenetech, you are really lucky to have someone like Mike.The suggestons and tips I recieved from him made me feel like I was a part Xenetech Family. tHANKS Robert
and only stopped for lunch.Mike made some more adjustments,to my table and beam, and we cut some circles in wood and and plastic.They came out great.Just some words for Xenetech, you are really lucky to have someone like Mike.The suggestons and tips I recieved from him made me feel like I was a part Xenetech Family. tHANKS Robert