What sanding discs fit the Harbor Freight Multi Function tool?

[dennis thompson]

Does anyone know if the Fein or Bosch triangular sanding discs for their multi function tool will fit the Harbor Freight multi function tool?
Thanks
Dennis

[Dave Sweeney]

I don't know about the Fein or the Bosch but these (http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=65985) will fit it.

[Bob Wingard]

I picked up a few rolls of sticky-backed sandpaper in various grits .. unroll a short section, press my FEIN's head into the sticky partion, cut around it with a utility knife, sand away. It's FAR less expensive than ANY of the precut papers I've found, and they tend to fit the head more exactly becase they are individually trimmed to fit. Most times, I don't want or like the paper overhanging the pad by about 1/8" all the way around. and this method eliminates that situation completely.