David Winer
05-31-2009, 8:20 PM
From various dicussions on this forum I’m convinced it’s better to set up my Powermatic dust collector to a 230 volt machine. I will be using it on the same circuit with only one other machine at a time.
The manual includes a diagram and it refers to another diagram inside the motor housing. I find these two diagrams different and a bit confusing with their references to numbers and colors. The motor diagram is so small that I could not read it well, so I photographed it with a macro lens and then used that image to create a combined diagram in Photoshop (attached). The wire colors match the exposed wires inside the motor cover.
The procedure now seems fairly straight forward, but I hope to hear from some electrics expertise here that my diagram is o.k.
The manual includes a diagram and it refers to another diagram inside the motor housing. I find these two diagrams different and a bit confusing with their references to numbers and colors. The motor diagram is so small that I could not read it well, so I photographed it with a macro lens and then used that image to create a combined diagram in Photoshop (attached). The wire colors match the exposed wires inside the motor cover.
The procedure now seems fairly straight forward, but I hope to hear from some electrics expertise here that my diagram is o.k.