View Full Version : Sandpaper sources
Tim Anderson
05-27-2009, 8:27 PM
Where do you guys get your sandpaper? I've got a powermatic spindle sander and a jet 22-44 drum. Thanks
Tim
Jim Watts
05-27-2009, 8:30 PM
http://www.woodworkingshop.com/
Mike Henderson
05-27-2009, 8:34 PM
Klingspor is very good. I've also been using the Mirka ROS paper from Amazon - example here (http://www.amazon.com/Mirka-23-615-180-8-Hole-Dustless-Sanding/dp/B0000223T9/ref=wl_it_dp?ie=UTF8&coliid=IHTLE2X8FN0DS&colid=2M1XMQFRF5982).
Mike
Thomas Williams
05-27-2009, 9:00 PM
Another vote for Klingspor.
Matt Tawes
05-27-2009, 10:07 PM
Don't use my spindle sander enough to have ordered new sleeves over the last few years but for my Performax 22-44 I've used: http://www.onlineindustrialsupply.com/index.html
Use those rubber cleaning sticks any your sandpaper will last infinitely longer. I've also ordered theirs Indasa and Mirka discs for my ROS, prices are pretty good.
Jim McFarland
05-27-2009, 10:14 PM
Industrial Abrasives for 16-32 and 2" rolls for lathe sanding:
http://www.industrialabrasives.com/zencart/index.php?main_page=index&cPath=79_153
Jim Butterfield
05-27-2009, 10:50 PM
http://www.onlineindustrialsupply.com
John Schreiber
05-28-2009, 4:11 PM
+1 on Klingspor. http://www.woodworkingshop.com/ (http://www.woodworkingshop.com/)
I placed a ~~ $100 order with them a couple of months ago and I'm set for a year or more of sanding. Everything I got was high quality and the price was better than I could find elsewhere.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.