Sandpaper sources

[Tim Anderson]

Where do you guys get your sandpaper? I've got a powermatic spindle sander and a jet 22-44 drum. Thanks

Tim

[Jim Watts]

http://www.woodworkingshop.com/

[Mike Henderson]

Klingspor is very good. I've also been using the Mirka ROS paper from Amazon - example here (http://www.amazon.com/Mirka-23-615-180-8-Hole-Dustless-Sanding/dp/B0000223T9/ref=wl_it_dp?ie=UTF8&coliid=IHTLE2X8FN0DS&colid=2M1XMQFRF5982).

Mike

[Thomas Williams]

Another vote for Klingspor.

[Matt Tawes]

Don't use my spindle sander enough to have ordered new sleeves over the last few years but for my Performax 22-44 I've used: http://www.onlineindustrialsupply.com/index.html
Use those rubber cleaning sticks any your sandpaper will last infinitely longer. I've also ordered theirs Indasa and Mirka discs for my ROS, prices are pretty good.

[Jim McFarland]

Industrial Abrasives for 16-32 and 2" rolls for lathe sanding:
http://www.industrialabrasives.com/zencart/index.php?main_page=index&cPath=79_153

[Jim Butterfield]

http://www.onlineindustrialsupply.com

[John Schreiber]

+1 on Klingspor. http://www.woodworkingshop.com/ (http://www.woodworkingshop.com/)

I placed a ~~ $100 order with them a couple of months ago and I'm set for a year or more of sanding. Everything I got was high quality and the price was better than I could find elsewhere.