View Full Version : Newbie - Pen stock question
Richard Gibson
05-27-2009, 1:22 PM
I have seen stock for turning pens at Woodcraft and on-line at several sites. Is there a place that you know of that sells the stock in long lengths , say 14"? I have an idea for a different item and the pen blanks are perfect except for length.
John Terefenko
05-27-2009, 1:43 PM
Are you talking wood or acrylic???
Brian Brown
05-27-2009, 3:40 PM
If you have a table saw or band saw, you can buy boards in any species you want, and cut them yourself. In the long run if you make even a few of the 14" blanks, you will be saving money.
Bernie Weishapl
05-27-2009, 10:20 PM
I agree with Brian. I get like 1 X 4 cherry, walnut, maple, ash, and mahogany. I cut my own pen blanks into 1 X 1 pieces. Also use some it to make finials.
Jim Kountz
05-28-2009, 1:13 AM
Way cheaper to make your own. Now if you need the hole drilled in a long skinny blank thats another story!!
Dan Forman
05-28-2009, 3:57 AM
If it's acrylic you are looking for, this place sells 40" lengths.
http://www.woodpenpro.com/acrylic_pen_blanks/0331_acrylic_blanks_40_inch_super_rod.html
If you want exotic wood without having to buy a whole board, you might try over at IAP (Internationoal Association of Penturners), and check out some of the sellers there.
Dan
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.