View Full Version : The 4th humidor in the series of 4.
Bill Wyko
05-22-2009, 5:17 PM
I built 4 of these using a variety of woods. This one is Bubinga and Curly Maple. It'll hold around 150 cigars. It weighs in at a whopping 14 lbs. In these pics it doesn't have the seal and I didn't remove the masking tape. These were the last pics I had a chance to take before it went out though. Please enjoy.:D
http://pic80.picturetrail.com/VOL2109/11908737/21952073/362703873.jpg
http://pic80.picturetrail.com/VOL2109/11908737/21952073/362703876.jpg
http://pic80.picturetrail.com/VOL2109/11908737/21952073/362703882.jpg
http://pic80.picturetrail.com/VOL2109/11908737/21952073/362703887.jpg
http://pic80.picturetrail.com/VOL2109/11908737/21952073/362703898.jpg
http://pic80.picturetrail.com/VOL2109/11908737/21952073/362703867.jpg
http://pic80.picturetrail.com/VOL2109/11908737/21952073/362703846.jpg
Bill Wyko
05-22-2009, 5:26 PM
I've gone to a new style with more capacity. I think you're going to like the next one.:D
Bruce Page
05-22-2009, 6:25 PM
I like this one! Those hinges are outstanding!
Heck, it's all outstanding!
Mike McCann
05-22-2009, 6:35 PM
WOW Bill that is great.
John Keeton
05-22-2009, 7:20 PM
Another winner!! The bubinga is fantastic, and the contrast with the maple is perfect!
So, how do you get the curly maple to machine that well without tearout?
Don C Peterson
05-22-2009, 7:37 PM
Nice! I really like those hinges. One of these days I'll attempt to make some wooden hinges...but not today...
Adam Grills
05-22-2009, 7:55 PM
Very fantastic!
In the last picture there are drilled holes approx 1/4" deep in each front corner what are these for... the gasket?
How are the fancy finger joints done?
Adam
Bill Wyko
05-22-2009, 8:06 PM
Thanks very much. The holes are for magnets and the groove all the way around the edge of the cedar is for a gasket. Here's a pic of another humi with it in place.
http://pic80.picturetrail.com/VOL2109/11908737/21650512/357822583.jpg
http://pic80.picturetrail.com/VOL2109/11908737/21650512/357822590.jpg
http://pic80.picturetrail.com/VOL2109/11908737/21650512/357796863.jpg
John Michaels
05-22-2009, 8:30 PM
Amazing craftsmanship. The wood is stunning!! Makes me want to start buying cigars.
Jim Becker
05-22-2009, 9:36 PM
Outstanding work!
Craig T. Smith
05-23-2009, 8:08 AM
Bill, Absolutly wonderful, all around. How did you make those two tone joints. I can't fathom how you did it. Wonderful Humidors. Craig
Larry Fox
05-23-2009, 10:02 AM
Bill - that is outstanding (as usual). Wood combination is fantastic and that inlay in the top is perfect to bridge the contrast between those two species.
Bill Wyko
05-23-2009, 1:00 PM
Bill, Absolutly wonderful, all around. How did you make those two tone joints. I can't fathom how you did it. Wonderful Humidors. Craig
Thank you. That my friend, is the power of the Incrajig router fence system. :D
Paul Hathaway
05-23-2009, 7:59 PM
Absolutely beautiful!!
John Thompson
05-23-2009, 11:03 PM
That one is most certainly an eye catcher, Bill. Outstanding...
Sarge..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.