PDA

View Full Version : Lasering on large glasses with rotary attachment



Andrea Weissenseel
05-22-2009, 8:06 AM
I had to do a large (2 liter ) beer glass which did not fit in the rotary attachment that I have - the upper diameter was to large. So I lasered a ring of acrylic as an adapter. Here is what came out.

Steve Clarkson
05-22-2009, 8:16 AM
Andrea, that came out great!

Now what did you fill the engraving with? Regular acrylic paint? I assume it's not dishwasher safe......

nancy barry
05-22-2009, 8:30 AM
Might you post a pic of the adapter with the glass as it was "attached" to the machine?

thanks, nancyB

Frank Corker
05-22-2009, 8:48 AM
Andrea, nice job on the lasering. Steve, I don't think Andrea did the gold stuff that you see there, I think that was already on it.

Andrea Weissenseel
05-22-2009, 9:25 AM
Frank is wright, the gold was already on the class - sory for the misunderstanding Steve

@Nancy, picture will follow when my digi is reloaded

Mike Null
05-22-2009, 10:10 AM
Andrea

Very clever of you.

A very good beer, by the way.

The gold is foil. To a degree it is dishwasher safe. I've had my Kolsch glasses for 15 years and the foil is wearing thin but they've always been washed in the dishwasher. Unfortunately I had to use a substitute beer.