PDA

View Full Version : Millwork needed in ohio


Matthew Curtis
05-13-2009, 1:48 PM
I need to get some millwork done on several large pieces of roughcut oak and cherry. I was hoping some of you guys can help me find a place near Marysville ohio or Bellefontaine ohio. I just do not have the equipment to deal with the pieces I have. Thanks
Lance Norris
05-13-2009, 5:09 PM
Well... certainly NOT close to where you asked for, but Keim Lumber in Charm, Ohio is fantastic.

http://www.keimlumber.com/
Matthew Curtis
05-15-2009, 1:19 PM
mostly wanting my 8/4 into 4/4 and dimensioning to common thickness
Dan Forman
05-15-2009, 2:57 PM
Not in Ohio, but it sounds like you just want it jointed and planed? How wide is the stock, and do you want it back full width? What is your idea of common thickness? This would let others know if their jointer or planer is up to the task.

Dan
Matthew Curtis
05-18-2009, 2:27 PM
Yes jointed and planed. 16" wide. currently it is about 2.5" thick. Would like to have some 3/4" when finished and some 2".
Wes Billups
05-18-2009, 8:10 PM
Don't know what happened to my original questions for more details but I've only got a 13" planer. Sorry I couldn't be more help.

Wes