Can someone please take a look at this?

[Carol Barbero]

Hi All:
Can someone more knowledgeable than myself please take a look at this and tell me if i've done it right to print on black acrylic? I still don't think the picture is right. I converted to black & white 1 bit, stucki and inverted. What happens with that black background?

Thanks

[Tim Bateson]

I don't see anything in the CorelDraw file.

[Dave Russell Smith]

The image is back to front, remember the laser see's shades of black and white so your would have a black box and white image

[John W. Love]

It looks like you are using X3, but like Tim I don't see anything either. =(

[Bill Cunningham]

It loads into x4 ok.. What you are going to have to do to the picture before you put it though any 1 bit conversion is this.. The background must be black 'before' you invert it, so it will be white after..
The RGB bit map with the gold and blue may give unexpected results, It would be best to convert it as well..

[Carol Barbero]

Thank you all - I think I've got it now!!