View Full Version : Sink tray for inset door
joe milana
04-30-2009, 6:52 PM
Any ideas for hinging a pullout sinktray for a kitchen sink base with inset doors? I see self closing hinges for overlay doors, but nothing for inset doors.
Thanks
Todd Burch
04-30-2009, 7:41 PM
There are special made spring hinges for those trays that are self-stopping (and thus do not rely on the wood panel to stop it. Try a specialty cabinet hardware supplier.
Roger Jensen
04-30-2009, 11:40 PM
I think these are the best (from Rev-a-Shelf):
http://www.rev-a-shelf.com/products/images/full_size/ETH_CLOSE.jpg
It is part number 6541-36-15-ETH. They are adjustable to help line up the fronts. I think you can just move them back for inset fronts. They also sell the trays, but you may be able to find cheaper ones elsewhere.
Roger
phil harold
05-01-2009, 8:21 AM
I have used these before on inset doors
Steve Clardy
05-02-2009, 7:59 PM
I think these are the best (from Rev-a-Shelf):
It is part number 6541-36-15-ETH. They are adjustable to help line up the fronts. I think you can just move them back for inset fronts. They also sell the trays, but you may be able to find cheaper ones elsewhere.
Roger
Same as what I use. Very good hinges.
joe milana
05-03-2009, 3:54 PM
Same as what I use. Very good hinges.
Thanks! I wasn't sure something like that would work without excessive back beveling
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.