Sink tray for inset door

[joe milana]

Any ideas for hinging a pullout sinktray for a kitchen sink base with inset doors? I see self closing hinges for overlay doors, but nothing for inset doors.

Thanks

[Todd Burch]

There are special made spring hinges for those trays that are self-stopping (and thus do not rely on the wood panel to stop it. Try a specialty cabinet hardware supplier.

[Roger Jensen]

I think these are the best (from Rev-a-Shelf):
http://www.rev-a-shelf.com/products/images/full_size/ETH_CLOSE.jpg

It is part number 6541-36-15-ETH. They are adjustable to help line up the fronts. I think you can just move them back for inset fronts. They also sell the trays, but you may be able to find cheaper ones elsewhere.

Roger

[phil harold]

I have used these before on inset doors

[Steve Clardy]

I think these are the best (from Rev-a-Shelf):


It is part number 6541-36-15-ETH. They are adjustable to help line up the fronts. I think you can just move them back for inset fronts. They also sell the trays, but you may be able to find cheaper ones elsewhere.

Roger


Same as what I use. Very good hinges.

[joe milana]

Same as what I use. Very good hinges.

Thanks! I wasn't sure something like that would work without excessive back beveling