PDA

View Full Version : Epilog Template



Ray Rouleau
04-27-2009, 7:21 PM
Hi All,
The attached is a new template from Epilog, unfortunately the material they used is 1/8 th but I only have 1/4 material (which is actually .225 thick). I have no problem converting the cutouts on the footing portion, but I'm stuck trying to adjust the tabs on the bust and brace, any help would be greatly appreciated.
Rgds
Ray

Dave Russell Smith
04-27-2009, 11:38 PM
There you go Ray,have good one :). Remember to measure twice and cut once :rolleyes:

Ray Rouleau
04-28-2009, 6:26 PM
Thanks Dave! Not sure how you did it though?
Rgds
Ray

Dave Russell Smith
04-28-2009, 6:33 PM
Well if we all know everything then we would not be here right! ;)

Tim Bateson
04-28-2009, 7:44 PM
There you go Ray,have good one :). Remember to measure twice and cut once :rolleyes:

Measure??? Ohhh so that's why I cut half a dozen times :eek: and start over twice until I get the right size. :D

Dave Russell Smith
04-28-2009, 7:56 PM
Had to many smacks around the ear, starts to hurt after awhile and you soon learn that :)