Grizzly 12 x 20 Lathe and Stand

[Mark McGee]

This is my first wood turning lathe. It is a Grizzly G0658 which is a 12 x 20 with variable speed control. I am pleased with the ability of this lathe as well as the fit and finish.
116677
I built a stand for it using SYP construction lumber milled flat and glued up. The joinery is mortise and tenon with bolts and threaded rod to pull it together.
116678
116679
116680
Here is my design
116682

[Bernie Weishapl]

Mark that is a great looking setup. Bench looks stout and well made. I almost bought the Griz but they were backordered when I went to buy for quite a while so bought the 1220 Jet.

[Steve Schlumpf]

Mark - that looks like quite the rig! Good looking lathe and bench! Thanks for sharing!