Mark McGee
04-26-2009, 6:55 AM
This is my first wood turning lathe. It is a Grizzly G0658 which is a 12 x 20 with variable speed control. I am pleased with the ability of this lathe as well as the fit and finish.
116677
I built a stand for it using SYP construction lumber milled flat and glued up. The joinery is mortise and tenon with bolts and threaded rod to pull it together.
116678
116679
116680
Here is my design
116682
116677
I built a stand for it using SYP construction lumber milled flat and glued up. The joinery is mortise and tenon with bolts and threaded rod to pull it together.
116678
116679
116680
Here is my design
116682