Full side profile of a pickup truck needed

[James Jaragosky]

I am looking for a side profile of a pickup truck.
Just an outline is ok.
I seem to only able to find views that show the front end with a 3/4 side profile.
Thanks in advance for any and all help.
Jim J

[Dave Russell Smith]

Any particular make I have selection, here,s an example

[James Jaragosky]

Thanks for the files Dave.
I was able to modify the ford to suit my needs.
I really wanted to have the truck on blocks; but I am not yet talented enough for that.
I plan to use your file to make a yard prop to hold flowers.
I will cut it out tommorow and see if it works.
Jim J.
BTW the file below is for .5 material;p mine will be 4' long and 14 in high

[james mcgrew]

liiiike thiis ?

[James Jaragosky]

liiiike thiis ?
Simple yet effective; I like it
I have a tendency to over complicate things.
Thanks for the help.
BTW there are a lot of duplicate and open vectors in Dave's truck files.
I am not complaining; I just wanted to let anyone know that might download it.

[James Jaragosky]

I finely got around to finishing that flower box design.
here is a picture of the completed project.