keith ouellette
04-10-2009, 6:47 PM
115362
I made this spanner wrench to adjust my parallel table jointer. It works much better than a normal spanner wrench because it is much easier to control. It allows me to turn the adjustment cams with more precision.
It is made out of an old lawn mower blade. I just ground it down to the thickness and shape I needed.
Thought I would share it.
I made this spanner wrench to adjust my parallel table jointer. It works much better than a normal spanner wrench because it is much easier to control. It allows me to turn the adjustment cams with more precision.
It is made out of an old lawn mower blade. I just ground it down to the thickness and shape I needed.
Thought I would share it.