Joe Mcclaran
04-07-2009, 8:54 PM
Just finished a nightstand, two coats of stain, three coats of poly. How long should I wait before I can use furniture wax? Thank You.
Rich Engelhardt
04-08-2009, 2:51 AM
Hello,
Depends on the wax.
24 hours to a week should suffice.
SC Johnson paste wax has no aromatic solvents, so a 24 hour cure should be safe.
Other waxes can contain Xylol or Toulol <--heavy armomatic solvents, so a longer cure would be required.
The side of the can should carry a warning about the presence of aromatic solvents - but - to be safe google the MSDS for the product.
While not definative as a list of ingrediants, the MSDS will list anything considered a danger or having special transportation requirements - which aromatics fall into.
I suggest running a large sample to try the wax on first before doing the real project.
FWIW - poly usually doesn't "do wax" well anyhow, so it may be to your advantage to skip it altogether.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.