Rick Moyer
04-04-2009, 7:48 AM
As you can see from the pics in this thread www.sawmillcreek.org/showthread.php?t=108682 (http://www.sawmillcreek.org/showthread.php?t=108682),
my DC run will start at the middle of the window. Most everyone runs the ducting to the ceiling and then to where they need it. I am wondering if I should run the duct to the ceiling first, or could I drop down to the floor and go that way? If I can arrange things so that all the ducting will be on the pictured wall, I am wondering if it makes a difference WHERE the vertical rises are?
The OH door hardware precludes any drops in half of the garage (sorry, SHOP!), so I plan to try to keep most of the ducting along the wall you see. I still need to figure out how to deal with the TS, as well as the CMS that is used on the table under the red tool box in the foreground. I could drop a 4"max pipe between the OH doors for the TS. There is only about 5" between the OH door tracks.
I guess what I am asking is; Does it matter where the vertical rise is for the DC? If I use my Delta single stage DC for the TS, I could keep the cyclone ducting along the one wall.
Suggestions?
note: I'm still arranging things, so the only thing that HAS to be where it is is the DC.
my DC run will start at the middle of the window. Most everyone runs the ducting to the ceiling and then to where they need it. I am wondering if I should run the duct to the ceiling first, or could I drop down to the floor and go that way? If I can arrange things so that all the ducting will be on the pictured wall, I am wondering if it makes a difference WHERE the vertical rises are?
The OH door hardware precludes any drops in half of the garage (sorry, SHOP!), so I plan to try to keep most of the ducting along the wall you see. I still need to figure out how to deal with the TS, as well as the CMS that is used on the table under the red tool box in the foreground. I could drop a 4"max pipe between the OH doors for the TS. There is only about 5" between the OH door tracks.
I guess what I am asking is; Does it matter where the vertical rise is for the DC? If I use my Delta single stage DC for the TS, I could keep the cyclone ducting along the one wall.
Suggestions?
note: I'm still arranging things, so the only thing that HAS to be where it is is the DC.