Dave Johnson29
04-01-2009, 2:10 PM
Hi All,
I just got a request from a board member regarding my Power Meater for assessing the Wattage of the laser.
http://www.sawmillcreek.org/showpost.php?p=1091800&postcount=15
I prefer to keep all such answers in threads so others can search and find the answers too. So, to answer the two questions.
A1: The puck is made from a soft grade of aluminum
A2: It is held on with a setscrew visible in the picture. I used thermal transfer paste in the hole before inserting the meat thermometer and locking it in position.
I just got a request from a board member regarding my Power Meater for assessing the Wattage of the laser.
http://www.sawmillcreek.org/showpost.php?p=1091800&postcount=15
I prefer to keep all such answers in threads so others can search and find the answers too. So, to answer the two questions.
A1: The puck is made from a soft grade of aluminum
A2: It is held on with a setscrew visible in the picture. I used thermal transfer paste in the hole before inserting the meat thermometer and locking it in position.