View Full Version : Can anyone ID this machine?
Ed Kilburn
03-31-2009, 9:41 PM
It looks like a stroke sander but the pulleys are too low.
Sorry here's the pic
Bill Houghton
03-31-2009, 9:45 PM
Or more description.
Russ Massery
03-31-2009, 9:55 PM
I can't see it either:rolleyes:
Frank Trinkle
03-31-2009, 9:57 PM
Hmmm... I think it's a 19" flat screen monitor, but it might be 20". Black frame with "Dell" written on the bottom.
That's what I see!:eek:
Ed Kilburn
03-31-2009, 10:02 PM
Sorry guys I've added the pic.
Peter Quinn
03-31-2009, 10:11 PM
Looks like a stroke sander of some kind, missing the belt and perhaps a few other things.
Tom Henderson2
03-31-2009, 10:16 PM
I'd guess it is intended to help run twine around bundles of newspapers, or perhaps a box. The goods go on the platform, the twine is wrapped around, then the platform is turned 90 degrees and the process repeated.
Just a guess....
Ed Kilburn
03-31-2009, 10:31 PM
Yes that what I thought at first but the sanding belt would have to run with the grit running against the pulleys.
Bill Huber
03-31-2009, 10:44 PM
Could it be this sander?
http://www.owwm.com/photoindex/detail.aspx?ID=3932
David G Baker
03-31-2009, 11:23 PM
Bill,
I think you called it. Looks almost identical but your photo shows that the one in question may be missing a few parts.
Bill Huber
04-01-2009, 12:00 AM
Bill,
I think you called it. Looks almost identical but your photo shows that the one in question may be missing a few parts.
On the one posted is has right on the front Oliver 298, I just went to OWWM (http://www.owwm.com/home.aspx) and looked it up and found one.
That is a big old sander, I guess that is more then I would need for small boxes.....:D
There is two of them on the site.
http://www.owwm.com/photoindex/detail.aspx?id=5762
Ed Kilburn
04-01-2009, 8:32 AM
Thank you Bill, you nailed it. I signed up to join OWWM and just got activated this morning.
M Toupin
04-01-2009, 9:54 AM
Bill hit it. It's a Oliver stroke sander. It looks fairly complete, at least the main parts are there. With a little sheet metal work the shrouds can be replicated.
There's a definite learning curve, but once you get the touch they work great for panels etc.
Mike
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.