View Full Version : golf vector images
Devon Jones
03-31-2009, 11:45 AM
does anyone have any golf vector images? also if i wanted to inlay a golf ball and golf tee does anyone have any ideas how i would do it i am a little stuck? thanks
Mike Null
03-31-2009, 12:45 PM
Devon
What do you want to inlay them in?
Devon Jones
03-31-2009, 1:08 PM
well i was thinking wood. instead of having the laser engrave something i can use the ball and tee used to win the tourny into the piece of wood that this cust wants his score cards engraved into. i tried to mess around with the 3d driver and do different levels of black but i would have to engrave like 30 passes for it to go the depth i want. did any of that make sense? im bad with words
Mike Null
03-31-2009, 3:25 PM
Here's one I posted earlier.
http://sawmillcreek.org/attachment.php?attachmentid=92617&d=1216217787
Devon Jones
03-31-2009, 3:29 PM
yes that is just what i am talking ab out how did u do it? am i looking into it too much?
Arturo Villegas
03-31-2009, 4:19 PM
Hope you can use them.
Devon Jones
03-31-2009, 4:54 PM
thank you Arturo
Steve Clarkson
03-31-2009, 5:04 PM
Here's one I posted earlier.
http://sawmillcreek.org/attachment.php?attachmentid=92617&d=1216217787
Yea Mike......how'd you balance that golf ball on 1/4" acrylic?
Mike Null
04-01-2009, 5:47 AM
Steve and Devon
That's a magic trick I learned from the great Slydini.
Actually I drilled a shallow hole in the wood, about 1" in diameter by a quarter inch deep and epoxied the ball.
The text on the brass plate is laser sublimated.
This was for my neighbor so I didn't charge but he insisted I accept a bottle of Scotch which I forced myself to take.
Ed Bagley
04-02-2009, 10:49 PM
Arturo
Can you resend as an uncompressed AI?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.